It is well known that NACP NS0-141 - NS0-141 exam test is the hot exam of Network Appliance certification. gopass4side offer you all the Q&A of the NS0-141 real test . It is the examination of the perfect combination and it will help you pass NS0-141 exam at the first time!

The NACP NS0-141 Questions and Answers as well as our other NACP NS0-141 exam training tools are not only priced to be easy on your budget - but each one is also backed with our guarantee. gopass4side guarantees that after using our Cisco certification training tools, you will be prepared to take and pass your NACP NS0-141 exam.

Our on-site online training experts create all of the Network Appliance NS0-141 exam products available through gopass4side. Our main goal is to get your certified with a firm understanding of the core material. Whereas other online distributors only concern themselves with helping you obtain the paper, we strive to educate the certification candidate and better prepare them for their IT career.

Why choose gopass4side NS0-141 braindumps

Quality and Value for the NS0-141 Exam
100% Guarantee to Pass Your NS0-141 Exam
Downloadable, Interactive NS0-141 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.

　
　
Exam : Network Appliance NS0-141
Title : Network Appliance High Availability Exam 7G


1. Which of the following hardware components is NOT required for Fabric Attached MetroCluster?
A. VI-MC cluster adapter
B. FC-HBA
C. LC/LC node-to-node switch cables
D. Network interface card
Answer: C

2. You are troubleshooting a clustered failover problem at a customer site. The customer explains that both storage appliances were NFS mounted onto the Solaris host. You attempt to create a file on the NFS mount point for the inaccessible appliance, but you get the following error:
NFS server filer2 not responding still trying.
Symptoms:
1) When not in takeover mode, both storage appliances operate normally.
2) In takeover mode, the taken over node is not accessible on the network.
You perform a"cf giveback" and you can now create a file over NFS on both appliances. What should you do first to resolve this issue?
A. Replace the cluster interconnect card and run diagnostics "all"to ensure proper system operation.
B. Replace the NIC adapter.
C. Use the cluster-config-checker.cgi to identify the problem and corrective action.
D. Submit a new bug report.
Answer: C

3. A mirrored volume, volX, is composed of twelve 36-Gigabyte disks: six in volX/plex0, six in volX/plex1. A drive fails in plex1, but pool 1 contains only 72-Gigabyte spare disks. Data ONTAP will do which of the following?
A. Choose a 72-Gigabyte disk and downsize it
B. Halt after 24 hours of running in degraded mode
C. Alert you that there are no 36-Gigabyte disks and wait for one to be inserted
D. Stop any applications that are running
Answer: A

4. A storage appliance in a clustered configuration can's access its partner's mailbox disks. When you enter the cf status command, you see the following:
filer2> cf status
filer1 is up, takeover disabled because of reason (partner mailbox disks not accessible or invalid)
What should you check first to resolve this issue?
A. Check volumes of all disks
B. Check NIC adapter
C. Check that initiator is set to "target"mode
D. Check for disk viability or FC-AL problems
Answer: D

5. A mirrored volume has a failed disk, but there are no available spares in the pool from which the degraded plex was built. Data ONTAP will:
A. Choose spare disks to reconstruct from the opposite pool
B. Warn you that there are no available spares from the proper pool
C. "Halt"after 24 hours if spare disks are not added to the proper pool
D. Stop all applications that are running
Answer: B

6. Please click the exhibit button.
In this example, volX contains three 36-Gigabyte disk drives. To create a mirror for volX, you issue the command to create the mirror: vol mirror volX.
You immediately realize that the disks used to create the mirror are 72 Gigabytes in size. You want to take the plex offline and destroy it. You enter the vol status -r command and it displays the output shown in the exhibit.
To successfully take volX/plex1 offline and destroy it, which of the following must be done?
A. Reboot the storage appliance.
B. Wait for the "resyncing"operation to complete.
C. Take volX/plex1 offline and split it off.
D. Rename volX/plex1.
Answer: B

7. Which of the following commands would you issue to perform a "clean" shutdown of a clustered system without allowing takeover to occur?
A. halt
B. halt -f
C. halt -d
D. sys-shutdown
Answer: B

8. Select the parameter for which the Cluster Configuration Checker does NOT test.
A. Mismatched option settings
B. Network interface configuration errors
C. Different versions of Data ONTAP on the local and partner nodes
D. Open firmware versions
Answer: D